Betacam is a family of half-inch professional videotape products developed by Sony from 1982 onwards. In casual use, "Betacam" singly is often used to refer to a Betacam camcorder, a Betacam tape, or a Betacam video recorder.
All Betacam variants from the original (plain) Betacam to Betacam SP and Digital Betacam, use the same shape cassettes, meaning vaults and other storage facilities do not have to be changed when upgrading to a new format. The cassettes come in two sizes: S and L. Betacam cameras can only load S tapes, while VTRs can play both S and L tapes. The cassette shell and case for each Betacam cassette is colored differently depending on the format, allowing for easy visual identification. There is also a mechanical key that allows a video tape recorder to tell which format has been inserted.

Variants
The original Betacam format was launched in 1982. It is an analog S-video format, storing the luminance (Y) in one track and the chrominance (C) on another, performing Compressed Time Division Multiplex, or CTDM. This splitting of channels provides a crisp, true broadcast quality product with 300 lines of horizontal luma resolution, and 120 lines chroma resolution (versus ~30 for Betamax/VHS).
The original Betacam format records on cassettes loaded with oxide-formulated tape, which are theoretically the same as used by its consumer market-oriented predecessor Betamax, introduced 7 years earlier by Sony in 1975. A blank Betamax-branded tape will work on a Betacam deck, and a Betacam-branded tape can be used to record in a Betamax deck. However, in later years Sony discouraged this practice, suggesting that the internal tape transport of a domestic Betamax cassette was not well suited to the faster tape transport of Betacam.
Although there is a superficial similarity between Betamax and Betacam in that they use the same tape cassette, they are really quite different formats. Betamax records relatively low resolution composite video using a heterodyne color recording system and only two recording heads, while Betacam uses four heads to record in component format, at a much higher linear tape speed, resulting in much-higher video and audio quality. A typical L-750 length Beta cassette that will yield about 3 hours of recording time on a Betamax VCR at its B-II speed, will only yield 30 minutes on a Betacam deck or camcorder.
It may also be noted that Matsushita / Panasonic also introduced a professional 1/2" component videotape format which used VHS style tape cassettes called "M-Format". However, while Sony's Betacam system became an industry standard the M format was a technical and marketing dud. A followup format called M-II was vastly improved but failed to catch on although it was an internal standard at NBC for a time.
Betacam was initially introduced as a camera line along with a video cassette player. The first cameras were the BVP-3, which utilized 3 saticon tubes, and the BVP1, which used a single tri-stripe Trinicon tube. Both these cameras could be operated standalone, or with their docking companion VTR, the BVV1, (quickly superseded by the BVV1A) to form the BVW1 (BVW1A) integrated camcorder. Tapes could not be played back in camera except in black and white for viewing in the camera's viewfinder only. Color playback required the studio source deck at first, the BVW10, which could not record, only play back. It was primarily designed as a feeder deck for A/B roll edit systems, usually for editing to a 1" Type C or 3/4" Umatic cassette edit master tape. There was also the BVW20 field playback deck, which was a portable unit with dc power and a handle, that was used to verify color playback of tapes in the field. Unlike the BVW10, it did not have a built in Time Base Corrector, or TBC.
With the popular success of the Betacam system as a news acquisition format, the line was soon extended to include the BVW15 studio player, and the BVW40 Studio Edit Recorder. The BVW15 added Dynamic Tracking which enabled clear still frame and jog playback, something the BVW10 could not deliver. The BVW40 enabled for the first time editing to a Betacam master, and if setup and wired correctly, true component video editing. It was also possible to do machine to machine editing between a BVW10/15 and BVW40 without an edit controller—a single serial cable between the units was all that was required to control the player from the recorder in performing simple assemble and insert editing. Additionally there were two field models introduced, the field recorder BVW25, and the BVW21 play only portable field deck.
At its introduction, many insisted that Betacam remained inferior to the bulkier 1" Type C and B recording, the standard broadcast production format of the late 70s to mid 80s. Additionally, the maximum record time for both the cameras and studio recorders was only half an hour, a severe limitation in television production. There was also the limitation that high quality recording was only possible if the original component signals were available, as they would be in a camcorder setup. If they had already been converted to composite video, re-converting them to components for recording and then eventually back to composite for broadcast, caused a severe drop in quality.
In 1986 Betacam SP was developed, which increased horizontal resolution to 340 lines. While the quality improvement of the format itself was minor, the improvement to the VTRs was enormous, in quality, features, and particularly, the new larger cassette with 90 minutes of recording time. Beta SP (for "Superior Performance") became the industry standard for most TV stations and high-end production houses until the late 1990s. Despite the format's age Beta SP remains a common standard for video post-production. The recording time is the same as for Betacam, 30 and 90 minutes for S and L, respectively. Tape speed is slightly slower in machines working in the 625/50 format, increasing tape duration of one minute for every five minutes of run time. So, a 90 minute tape will record 108 minutes of video in PAL.
Betacam SP is able to achieve its namesake "Superior Performance" over Betacam in the fact that it uses metal-formulated tape, as opposed to Betacam's oxide tape. Sony designed Betacam SP to be partially forward compatible with standard Betacam, with the capability that Betacam SP tapes can be played in oxide-era Betacam VTRs (such as the BVW-15 and BVW-40 mentioned earlier), but for playback only. Betacam SP-branded tapes cannot be used for recording in consumer Betamax VCRs like oxide Betacam tapes, due to Betacam SP's metal-formulation tape causing the video heads in a Betamax deck to wear prematurely, which are made of a softer material than the heads in a standard Betacam deck. However, Betacam SP tapes can be used without a problem in ED Beta VCRs, since the ED Beta format uses metal-formulated tape as well.
The new Betacam SP studio decks were the players, the BVW60 and BVW65, with Dynamic Tracking and the Edit Recorders, the BVW70, and the Dynamic Tracking model, the BVW75. The BVV5 was the BetcamSP dockable camera back, which could playback in color if its companion playback adapter was used. A new SP field recorder, the BVW 35, possessed the added benefit of a standard RS422 serial control port that enabled it to be used as an edit feeder deck. Though the four new studio decks could utilize the full 90 minute BetaSP cassettes, the BVW35 remained limited to the original Beta form factor 30 minute cassette shells. Answering a need for a basic office player, Sony also introduced the BVW22, a much less expensive desktop model that could be used for viewing and logging 90 minute cassettes, but could not be configured into an edit system.
Sony followed up the SP Field Recorder with the BVW50, that could record and play the large size 90 minute cassettes. After this, the deck line was relatively stagnant and incredibly popular for a decade, aside from some specialty models that could record digital audio.
Until the introduction of the BVW-200 camera though, the camera and recorder configuration was a docking system. The BVW-200 was an integrated camera recorder system. It sacrificed the flexibility of a docking camera in order to lose a substantial amount of weight. Eventually, non-docking camcorders became the most popular design by the mid-90s.
The final analog BetacamSP camcorder was the BVW600, which paired a camera front section very similar to the one on the DigiBeta DVW700 to a BetaSP recorder. Like every other Betacam camera system, and unlike the DigiBeta DVW700, the camera could not playback in color without the use of an outboard adapter.
In the early 90s a "pro" or "industrial" line of decks was introduced, with model numbers that echoed the naming conventions of Sony's 1970s era U-matic editing decks. These were the PVW2600 edit source feeder and the 2800 edit recorder. These excellent machines primarily lacked the third and fourth audio channels of the BVW series. In the mid-nineties, the far less expensive UVW series debuted. These machines were considerably simpler, somewhat lower quality, and were designed primarily to be used as companions to computer systems, and possessed very limited front panel controls, no jog and shuttle, with TBC control available only with extra cost remote TBC controller. These were represented by the UVW1800, a very popular edit recorder, and the UVW1400 and UVW1600 players.
Betacam and Betacam SP tape cassette shells varied in color depending on the manufacturer. Many companies sold Betacam tapes, sometimes of their own manufacture, sometimes rebranded. Fuji, Maxell, Ampex and 3M were just some of the major brands to do so.
Ampex, Thomson_SA and Philips each sold rebranded OEM versions of some of the Sony VTRs and Camcorders at various times in the 1980s and 1990s. Other than nameplates, these models were identical to the Sony models.

Betacam / Betacam SP
Digital Betacam (commonly referred to as Digibeta, d-beta, dbc or simply Digi) was launched in 1993. It supersedes both Betacam and Betacam SP, while costing significantly less than the D1 format. S tapes are available with up to 40 minutes running time, and L tapes with up to 124 minutes.
The Digital Betacam format records a DCT-compressed component video signal at 10-bit YUV 4:2:2 sampling in PAL resolutions at a bitrate of 90 Mbit/s plus four channels of uncompressed 48 kHz / 20 bit PCM-encoded audio. A fifth analog audio track is available for cueing, and a linear timecode track is also used on the tape.
Digital Betacam is a popular digital video cassette format for broadcast use. Its main competitor is the Panasonic DVCPRO50 cassette format.
Another key element which aided adoption was Sony's implementation of the SDI coaxial digital connection on Digital Betacam decks. Facilities could begin using digital signals on their existing coaxial wiring without having to commit to an expensive re-installation.
Typically Digital Betacam videotape is sold in a blue cassette container.

Digital Betacam
Betacam SX is a digital version of Betacam SP introduced in 1996, positioned as a cheaper alternative to Digital Betacam. It stores video using MPEG 4:2:2 Profile@ML compression, along with four channels of 48 kHz 16 bit PCM audio. All Betacam SX equipment is compatible with Betacam SP tapes. S tapes have a recording time up to 62 minutes, and L tapes up to 194 minutes.
The Betacam SX system was very successful with newsgathering operations which had a legacy of Betacam and Betacam SP tapes. A Betacam SX deck can natively play and work from the analog tapes interchangeably, because it contains both analog and digital playback heads.
Betacam SX uses MPEG-2 4:2:2P@ML compression, in comparison with other similar systems that use 4:1:1 coding. It gives better chroma resolution and allows certain postproduction processes such as Chroma-Key.
This format compresses the video signal from 170Mb/s to only 18Mb/s. It means a compression ratio of almost 10:1, which is quite high. However, it employs temporal compression, recording pair of pictures IBIBIB… where "I" means Intra-coding, while "B" means Biderectional-coding. This strategy allows high quality pictures at low bit-rates.
Together with Betacam SX, Sony introduced a generation of hybrid recorder, allowing use of both tape and disk recording on the same deck, and high speed dubbing from one to another. This was intended to save wear on the video heads for studio applications, as well to speed up online editing.
Betacam SX also features a good shot mark feature, that allows marking of each scene for fast retrieval. A tape deck can scan the tape for recorded marks of each single cassette, and show it to the operator.
The cameras themselves are generally considered by most sound recordists to be quite noisy in operation, possibly because the amount of computer processing power, and subsequent generated heat, leads to cooling fans being used to keep the camera at a reasonable temperature.
Betacam SX tape shells are bright yellow.
Although Betacam SX machines have gone out of production, the format is still used by many newsgathering operations, including San Diego's KFMB-TV, and NBC's operations in the San Francisco Bay Area at KNTV and KSTS. Many news archives still contain SX tapes.

HDCAM / HDCAM SR

DVCAM
DVCPRO
D5 HD